15 Miter Saw Tips Every DIYer Should Master

#4 – Replacing the Stock Saw Blade

Generally, the saw blades that feature more teeth are capable of producing crisper and cleaner cuts, while those with fewer teeth usually deliver cuts that are far rougher. Blades sporting more teeth are exceptionally good for the DIY furniture projects, while those with a lesser number of teeth can come in handy for projects where the look of the cuts is not essential. Unfortunately for the DIY furniture enthusiasts, most models usually come with blades that are designed for cutting studs, and those aren’t the best choice for the more delicate work. The first upgrade we recommend is to purchase a brand new blade – such as Freud 100 tooth Diablo Ultra Fine. This blade is capable of cutting through the wood like the hot knife cuts through butter, leaving the crisp and smooth cuts that are great for the DIY furniture projects. So, don’t hesitate and get yourself a new blade if you’re interested in finer woodworking projects. woodworking tips youtube woodworking tips and techniques

#5 – Trimming the Ends

Wood coming from the factories is not perfect – every DIY addict will confirm this. Holding a speed square against the random board’s end will rarely show you that it has a perfect square shape. In order to improve the quality of the furniture you intend to make, you’ll always have to square the board’s ends before you decide to cut out the pieces to length. Simply make a cut on the board’s end – you won’t have to cut off a lot of it, but just enough to make a proper square at the end. Once you do that, you’ll be ready to start cutting to length. woodworking tips youtube woodworking tips and techniques

#6 – Leaving a Line

One of our readers sent us a pretty interesting story. Years ago, he took a timber framing course, where his instructor used to repeat the same mantra over and over again – “leave the line, don’t forget to leave a line.”This is, actually, quite an important tip, and one that we’ve decided to incorporate into this article. The reason why the instructor insisted on not cutting the line is that leaving it allows one to tune the cut in case the board needs to be a bit shorter. Once you cut it too short, there’s no going back – it’s as simple as that. So, don’t forget to leave the line! woodworking tips youtube woodworking tips and techniques

Leaving a line

Prev2 of 5Next

Leave a Reply

Your email address will not be published. Required fields are marked *